mirror of https://github.com/wb2osz/direwolf.git
Minor User Guide update to mention IGate debug option.
This commit is contained in:
WB2OSZ
parent
1053bc483f
commit
95c22986ec
|
|
@ -184,7 +184,7 @@ int main (int argc, char *argv[])
|
|||
int d_t_opt = 0; /* "-d t" option for Tracker. Can be repeated for more detail. */
|
||||
int d_g_opt = 0; /* "-d g" option for GPS. Can be repeated for more detail. */
|
||||
int d_o_opt = 0; /* "-d o" option for output control such as PTT and DCD. */
|
||||
int d_i_opt = 0; /* "-d i" option for IGate. Repeat for more detail */
|
||||
int d_i_opt = 0; /* "-d i" option for IGate. Repeat for more detail */
|
||||
|
||||
|
||||
strlcpy(l_opt, "", sizeof(l_opt));
|
||||
|
|
@ -447,7 +447,7 @@ int main (int argc, char *argv[])
|
|||
case 'w': nmea_set_debug (1); break; // not documented yet.
|
||||
case 'p': d_p_opt = 1; break; // TODO: packet dump for xmit side.
|
||||
case 'o': d_o_opt++; ptt_set_debug(d_o_opt); break;
|
||||
case 'i': d_i_opt++; break;
|
||||
case 'i': d_i_opt++; break;
|
||||
#if AX25MEMDEBUG
|
||||
case 'm': ax25memdebug_set(); break; // Track down memory leak. Not documented.
|
||||
#endif
|
||||
|
|
@ -695,7 +695,7 @@ int main (int argc, char *argv[])
|
|||
* log the tracker beacon transmissions with fake channel 999.
|
||||
*/
|
||||
|
||||
log_init(misc_config.logdir);
|
||||
log_init(misc_config.logdir);
|
||||
beacon_init (&audio_config, &misc_config);
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,466 +0,0 @@
|
|||
#############################################################
|
||||
# #
|
||||
# Configuration file for Dire Wolf #
|
||||
# #
|
||||
# Linux version #
|
||||
# #
|
||||
#############################################################
|
||||
#
|
||||
# Consult the User Guide for more details on configuration options.
|
||||
#
|
||||
#
|
||||
# These are the most likely settings you might change:
|
||||
#
|
||||
# (1) MYCALL - call sign and SSID for your station.
|
||||
#
|
||||
# Look for lines starting with MYCALL and
|
||||
# change NOCALL to your own.
|
||||
#
|
||||
# (2) PBEACON - enable position beaconing.
|
||||
#
|
||||
# Look for lines starting with PBEACON and
|
||||
# modify for your call, location, etc.
|
||||
#
|
||||
# (3) DIGIPEATER - configure digipeating rules.
|
||||
#
|
||||
# Look for lines starting with DIGIPEATER.
|
||||
# Most people will probably use the given example.
|
||||
# Just remove the "#" from the start of the line
|
||||
# to enable it.
|
||||
#
|
||||
# (4) IGSERVER, IGLOGIN - IGate server and login
|
||||
#
|
||||
# Configure an IGate client to relay messages between
|
||||
# radio and internet servers.
|
||||
#
|
||||
#
|
||||
# The default location is "direwolf.conf" in the current working directory.
|
||||
# On Linux, the user's home directory will also be searched.
|
||||
# An alternate configuration file location can be specified with the "-c" command line option.
|
||||
#
|
||||
# As you probably guessed by now, # indicates a comment line.
|
||||
#
|
||||
# Remove the # at the beginning of a line if you want to use a sample
|
||||
# configuration that is currently commented out.
|
||||
#
|
||||
# Commands are a keyword followed by parameters.
|
||||
#
|
||||
# Command key words are case insensitive. i.e. upper and lower case are equivalent.
|
||||
#
|
||||
# Command parameters are generally case sensitive. i.e. upper and lower case are different.
|
||||
#
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# FIRST AUDIO DEVICE PROPERTIES #
|
||||
# (Channel 0 + 1 if in stereo) #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#
|
||||
# Many people will simply use the default sound device.
|
||||
# Some might want to use an alternative device by chosing it here.
|
||||
#
|
||||
# Linux ALSA is complicated. See User Guide for discussion.
|
||||
# To use something other than the default, generally use plughw
|
||||
# and a card number reported by "arecord -l" command. Example:
|
||||
|
||||
ADEVICE "Realtek High"
|
||||
|
||||
# Starting with version 1.0, you can also use "-" or "stdin" to
|
||||
# pipe stdout from some other application such as a software defined
|
||||
# radio. You can also specify "UDP:" and an optional port for input.
|
||||
# Something different must be specified for output.
|
||||
|
||||
# ADEVICE - plughw:1,0
|
||||
# ADEVICE UDP:7355 default
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Number of audio channels for this souncard: 1 or 2.
|
||||
#
|
||||
|
||||
ACHANNELS 1
|
||||
#ACHANNELS 2
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# SECOND AUDIO DEVICE PROPERTIES #
|
||||
# (Channel 2 + 3 if in stereo) #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#ADEVICE1 USB
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# THIRD AUDIO DEVICE PROPERTIES #
|
||||
# (Channel 4 + 5 if in stereo) #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#ADEVICE2 ...
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# CHANNEL 0 PROPERTIES #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
CHANNEL 0
|
||||
|
||||
#
|
||||
# The following MYCALL, MODEM, PTT, etc. configuration items
|
||||
# apply to the most recent CHANNEL.
|
||||
#
|
||||
|
||||
#
|
||||
# Station identifier for this channel.
|
||||
# Multiple channels can have the same or different names.
|
||||
#
|
||||
# It can be up to 6 letters and digits with an optional ssid.
|
||||
# The APRS specification requires that it be upper case.
|
||||
#
|
||||
# Example (don't use this unless you are me): MYCALL WB2OSZ-5
|
||||
#
|
||||
|
||||
MYCALL WB2OSZ-14
|
||||
|
||||
#
|
||||
# Pick a suitable modem speed based on your situation.
|
||||
# 1200 Most common for VHF/UHF. Default if not specified.
|
||||
# 300 Low speed for HF SSB.
|
||||
# 9600 High speed - Can't use Microphone and Speaker connections.
|
||||
#
|
||||
# In the simplest form, just specify the speed.
|
||||
#
|
||||
|
||||
MODEM 1200
|
||||
#MODEM 300
|
||||
#MODEM 9600
|
||||
|
||||
#
|
||||
# These are the defaults should be fine for most cases. In special situations,
|
||||
# you might want to specify different AFSK tones or the baseband mode which does
|
||||
# not use AFSK.
|
||||
#
|
||||
#MODEM 1200 1200:2200
|
||||
#MODEM 300 1600:1800
|
||||
#MODEM 9600 0:0
|
||||
#
|
||||
#
|
||||
# On HF SSB, you might want to use multiple demodulators on slightly different
|
||||
# frequencies to compensate for stations off frequency. Here we have 7 different
|
||||
# demodulators at 30 Hz intervals. This takes a lot of CPU power so you will
|
||||
# probably need to reduce the audio sampling rate with the /n option.
|
||||
|
||||
#MODEM 300 1600:1800 7@30 /4
|
||||
|
||||
|
||||
#
|
||||
# Uncomment line below to enable the DTMF decoder for this channel.
|
||||
#
|
||||
|
||||
DTMF
|
||||
|
||||
#
|
||||
# If not using a VOX circuit, the transmitter Push to Talk (PTT)
|
||||
# control is usually wired to a serial port with a suitable interface circuit.
|
||||
# DON'T connect it directly!
|
||||
#
|
||||
# For the PTT command, specify the device and either RTS or DTR.
|
||||
# RTS or DTR may be preceded by "-" to invert the signal.
|
||||
# Both can be used for interfaces that want them driven with opposite polarity.
|
||||
#
|
||||
# COM1 can be used instead of /dev/ttyS0, COM2 for /dev/ttyS1, and so on.
|
||||
#
|
||||
|
||||
#PTT COM1 RTS
|
||||
PTT COM1 RTS -DTR
|
||||
#PTT /dev/ttyUSB0 RTS
|
||||
|
||||
#
|
||||
# On Linux, you can also use general purpose I/O pins if
|
||||
# your system is configured for user access to them.
|
||||
# This would apply mostly to microprocessor boards, not a regular PC.
|
||||
# See separate Raspberry Pi document for more details.
|
||||
# The number may be preceded by "-" to invert the signal.
|
||||
#
|
||||
|
||||
#PTT GPIO 25
|
||||
|
||||
# The Data Carrier Detect (DCD) signal can be sent to the same places
|
||||
# as the PTT signal. This could be used to light up an LED like a normal TNC.
|
||||
|
||||
#DCD COM1 -DTR
|
||||
#DCD GPIO 24
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# CHANNEL 1 PROPERTIES #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#CHANNEL 1
|
||||
|
||||
#
|
||||
# Specify MYCALL, MODEM, PTT, etc. configuration items for
|
||||
# CHANNEL 1. Repeat for any other channels.
|
||||
|
||||
#CHANNEL 2
|
||||
#DTMF
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# TEXT TO SPEECH COMMAND FILE #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#SPEECH dwespeak.sh
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# VIRTUAL TNC SERVER PROPERTIES #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#
|
||||
# Dire Wolf acts as a virtual TNC and can communicate with
|
||||
# client applications by different protocols:
|
||||
#
|
||||
# - the "AGW TCPIP Socket Interface" - default port 8000
|
||||
# - KISS protocol over TCP socket - default port 8001
|
||||
# - KISS TNC via pseudo terminal (-p command line option)
|
||||
#
|
||||
|
||||
AGWPORT 8000
|
||||
KISSPORT 8001
|
||||
|
||||
#
|
||||
# It is sometimes possible to recover frames with a bad FCS.
|
||||
# This applies to all channels.
|
||||
#
|
||||
# 0 [NONE] - Don't try to repair.
|
||||
# 1 [SINGLE] - Attempt to fix single bit error. (default)
|
||||
# 2 [DOUBLE] - Also attempt to fix two adjacent bits.
|
||||
# ... see User Guide for more values and in-depth discussion.
|
||||
#
|
||||
|
||||
#FIX_BITS 0
|
||||
|
||||
#
|
||||
#############################################################
|
||||
# #
|
||||
# BEACONING PROPERTIES #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
GPSNMEA COM22
|
||||
|
||||
TBEACON delay=0:30 every=0:20 SYMBOL=car FREQ=146.955 OFFSET=-0.600 TONE=74.4
|
||||
|
||||
|
||||
|
||||
#
|
||||
# Beaconing is configured with these two commands:
|
||||
#
|
||||
# PBEACON - for a position report (usually yourself)
|
||||
# OBEACON - for an object report (usually some other entity)
|
||||
#
|
||||
# Each has a series of keywords and values for options.
|
||||
# See User Guide for details.
|
||||
#
|
||||
# Example:
|
||||
#
|
||||
# This results in a broadcast once every 10 minutes.
|
||||
# Every half hour, it can travel via two digipeater hops.
|
||||
# The others are kept local.
|
||||
#
|
||||
|
||||
#PBEACON delay=1 every=30 overlay=S symbol="digi" lat=42^37.14N long=071^20.83W power=50 height=20 gain=4 comment="Chelmsford MA" via=WIDE1-1,WIDE2-1
|
||||
#PBEACON delay=11 every=30 overlay=S symbol="digi" lat=42^37.14N long=071^20.83W power=50 height=20 gain=4 comment="Chelmsford MA"
|
||||
#PBEACON delay=21 every=30 overlay=S symbol="digi" lat=42^37.14N long=071^20.83W power=50 height=20 gain=4 comment="Chelmsford MA"
|
||||
|
||||
|
||||
# With UTM coordinates instead of latitude and longitude.
|
||||
|
||||
#PBEACON delay=1 every=10 overlay=S symbol="digi" zone=19T easting=307477 northing=4720178
|
||||
|
||||
|
||||
#
|
||||
# When the destination field is set to "SPEECH" the information part is
|
||||
# converted to speech rather than transmitted as a data frame.
|
||||
#
|
||||
|
||||
#CBEACON dest="SPEECH" info="Club meeting tonight at 7 pm."
|
||||
|
||||
|
||||
#
|
||||
# Modify for your particular situation before removing
|
||||
# the # comment character from the beginning of appropriate lines above.
|
||||
#
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# DIGIPEATER PROPERTIES #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#
|
||||
# For most common situations, use something like this by removing
|
||||
# the "#" from the beginning of the line below.
|
||||
#
|
||||
|
||||
DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
|
||||
|
||||
# See User Guide for more explanation of what this means and how
|
||||
# it can be customized for your particular needs.
|
||||
|
||||
# Filtering can be used to limit was is digipeated.
|
||||
# For example, only weather weather reports, received on channel 0,
|
||||
# will be retransmitted on channel 1.
|
||||
#
|
||||
|
||||
#FILTER 0 1 t/wn
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# INTERNET GATEWAY #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
# First you need to specify the name of a Tier 2 server.
|
||||
# The current preferred way is to use one of these regional rotate addresses:
|
||||
|
||||
# noam.aprs2.net - for North America
|
||||
# soam.aprs2.net - for South America
|
||||
# euro.aprs2.net - for Europe and Africa
|
||||
# asia.aprs2.net - for Asia
|
||||
# aunz.aprs2.net - for Oceania
|
||||
|
||||
IGSERVER noam.aprs2.net
|
||||
|
||||
# You also need to specify your login name and passcode.
|
||||
# Contact the author if you can't figure out how to generate the passcode.
|
||||
|
||||
IGLOGIN WB2OSZ-14 17845
|
||||
|
||||
# That's all you need for a receive only IGate which relays
|
||||
# messages from the local radio channel to the global servers.
|
||||
|
||||
# Some might want to send an IGate client position directly to a server
|
||||
# without sending it over the air and relying on someone else to
|
||||
# forward it to an IGate server. This is done by using sendto=IG rather
|
||||
# than a radio channel number. Overlay R for receive only, T for two way.
|
||||
|
||||
PBEACON sendto=IG delay=1:00 every=60:00 symbol="igate" overlay=R lat=42^37.14N long=071^20.83W
|
||||
#PBEACON sendto=IG delay=0:30 every=60:00 symbol="igate" overlay=T lat=42^37.14N long=071^20.83W
|
||||
|
||||
|
||||
# To relay messages from the Internet to radio, you need to add
|
||||
# one more option with the transmit channel number and a VIA path.
|
||||
|
||||
IGTXVIA 0 WIDE1-1
|
||||
|
||||
# You might want to apply a filter for what packets will be obtained from the server.
|
||||
# Read about filters here: http://www.aprs-is.net/javaprsfilter.aspx
|
||||
# Example, positions and objects within 50 km of my location:
|
||||
|
||||
IGFILTER m/100
|
||||
|
||||
# That is known as a server-side filter. It is processed by the IGate server.
|
||||
# You can also apply local filtering to limit what will be transmitted on the
|
||||
# RF side. For example, transmit only "messages" on channel 0 and weather
|
||||
# reports on channel 1.
|
||||
|
||||
filter 0 ig t/p
|
||||
|
||||
#FILTER IG 0 t/m
|
||||
#FILTER IG 1 t/wn
|
||||
|
||||
# Finally, we don't want to flood the radio channel.
|
||||
# The IGate function will limit the number of packets transmitted
|
||||
# during 1 minute and 5 minute intervals. If a limit would
|
||||
# be exceeded, the packet is dropped and message is displayed in red.
|
||||
|
||||
IGTXLIMIT 20 100
|
||||
|
||||
|
||||
#############################################################
|
||||
# #
|
||||
# APRStt GATEWAY #
|
||||
# #
|
||||
#############################################################
|
||||
|
||||
#
|
||||
# Dire Wolf can receive DTMF (commonly known as Touch Tone)
|
||||
# messages and convert them to packet objects.
|
||||
#
|
||||
# See separate "APRStt-Implementation-Notes" document for details.
|
||||
#
|
||||
|
||||
#
|
||||
# Sample gateway configuration based on:
|
||||
#
|
||||
# http://www.aprs.org/aprstt/aprstt-coding24.txt
|
||||
# http://www.aprs.org/aprs-jamboree-2013.html
|
||||
#
|
||||
|
||||
# Define specific points.
|
||||
|
||||
TTPOINT B01 37^55.37N 81^7.86W
|
||||
TTPOINT B7495088 42.605237 -71.34456
|
||||
TTPOINT B934 42.605237 -71.34456
|
||||
|
||||
TTPOINT B901 42.661279 -71.364452
|
||||
TTPOINT B902 42.660411 -71.364419
|
||||
TTPOINT B903 42.659046 -71.364452
|
||||
TTPOINT B904 42.657578 -71.364602
|
||||
|
||||
|
||||
# For location at given bearing and distance from starting point.
|
||||
|
||||
TTVECTOR B5bbbddd 37^55.37N 81^7.86W 0.01 mi
|
||||
|
||||
# For location specified by x, y coordinates.
|
||||
|
||||
TTGRID Byyyxxx 37^50.00N 81^00.00W 37^59.99N 81^09.99W
|
||||
|
||||
# UTM location for Lowell-Dracut-Tyngsborough State Forest.
|
||||
|
||||
TTUTM B6xxxyyy 19T 10 300000 4720000
|
||||
|
||||
|
||||
|
||||
# Location for the corral.
|
||||
|
||||
TTCORRAL 37^55.50N 81^7.00W 0^0.02N
|
||||
|
||||
# Compact messages - Fixed locations xx and object yyy where
|
||||
# Object numbers 100 - 199 = bicycle
|
||||
# Object numbers 200 - 299 = fire truck
|
||||
# Others = dog
|
||||
|
||||
TTMACRO xx1yy B9xx*AB166*AA2B4C5B3B0A1yy
|
||||
TTMACRO xx2yy B9xx*AB170*AA3C4C7C3B0A2yy
|
||||
TTMACRO xxyyy B9xx*AB180*AA3A6C4A0Ayyy
|
||||
|
||||
TTMACRO z Cz
|
||||
|
||||
# Receive on channel 0, Transmit object reports on channel 1 with optional via path.
|
||||
|
||||
#TTOBJ 0 1 WIDE1-1
|
||||
|
||||
# Advertise gateway position with beacon.
|
||||
|
||||
# OBEACON DELAY=0:15 EVERY=10:00 VIA=WIDE1-1 OBJNAME=WB2OSZ-tt SYMBOL=APRStt LAT=42^37.14N LONG=71^20.83W COMMENT="APRStt Gateway"
|
||||
|
||||
|
||||
Binary file not shown.
Loading…
Reference in New Issue