direwolf/CHANGES.txt

----------------
Revision history
----------------


-----------
Version 1.1  -- December 2014
-----------

* Changes since beta test version.

It is still highly recommended, but no longer mandatory, that
beaconing be enabled for digipeating to work.


* Known problems.

Sometimes kissattach fails to connect with "direwolf -p".
The User Guide and Raspberry Pi APRS document have a couple work-arounds.


-----------
Version 1.1 -- Beta Test 1 -- November 2014
-----------

* New Features:

Logging of received packets and utility to convert log file
into GPX format.

AGW network port formerly allowed only one connection at a 
time.  It can now accept 3 client applications at the same time.  
(Same has not yet been done for network KISS port.)

Frequency / offset / tone standard formats are now recognized.
Non-standard attempts, in the comment, are often detected and
a message suggests the correct format.

Telemetry is now recognized.  Messages are printed for
usage that does not adhere to the published standard.

Tracker function transmits location from GPS position.
New configuration file options: TBEACON and SMARTBEACONING.
(For Linux only.   Warning - has not been well tested.)

Experimental packet regeneration feature for HF use.
Will be documented later if proves to be useful...

Several enhancements for trying to fix incorrect CRC.
- Additional types of attempts to fix a bad CRC.
- Optimized code to reduce execution time.
- Improved detection of duplicate packets from different fixup attempts.
- Set limit on number of packets in fix up later queue.

Beacon positions can be specified in either latitude / longitude
or UTM coordinates.


* Bugs fixed:

For Windows version, maximum serial port was COM9.
It is now possible to use COM10 and higher.

Fixed issue with KISS protocol decoder state that showed up
only with "binary" data in packets (e.g.  RMS Express).

An extra 00 byte was being appended to packets from AGW
network protocol 'K' messages.

Invalid data from an AGW client application could cause an
application crash.

OSS (audio interface for non-Linux versions of Unix) should 
be better now.


-----------
Version 1.0a	May 2014
-----------

* Bug fix:

Beacons sent directly to IGate server had incorrect source address.


-----------
Version 1.0	May 2014
-----------

* New Features:

Received audio can be obtained with a UDP socket or stdin.
This can be used to take audio from software defined radios
such as rtl_fm or gqrx.

9600 baud data rate.

New PBEACON and OBEACON configuration options. Previously
it was necessary to handcraft beacons. 

Less CPU power required for 300 baud.  This is important
if you want to run a bunch of decoders at the same time
to tolerate off-frequency HF SSB signals.

Improved support for UTF-8 character set.

Improved troubleshooting display for APRStt macros.

In earlier versions, the DTMF decoder was always active because it 
took a negligible amount of CPU time.  Unfortunately this sometimes 
resulted in too many false positives from some other types of digital 
transmissions heard on HF. Starting in version 1.0, the DTMF decoder 
is enabled only when the APRStt gateway is configured.


-----------
Version 0.9	November 2013
-----------

* New Features:

Selection of non-default audio device for Linux ALSA.

Simplified audio device set up for Raspberry Pi.

GPIO lines can be used for PTT on suitable Linux systems.

Improved 1200 baud decoder.

Multiple decoders per channel to tolerate HF SSB signals off frequency.

Command line option "-t 0" to disable text colors.

APRStt macros which allow short numeric only touch tone
sequences to be processed as much longer predefined sequences.


* Bugs Fixed:

Now works on 64 bit target.


* New Restriction for Windows version:

Minimum processor is now Pentium 3 or equivalent or later.
It's possible to run on something older but you will need
to rebuild it from source.


-----------
Version 0.8	August 2013
-----------

* New Features:

Internet Gateway (IGate) including IPv6 support.

Compatibility with YAAC.

Preemptive digipeating option.

KISS TNC should now work with connected AX.25 protocols
(e.g. AX25 for Linux), not just APRS.


-----------
Version 0.7	March 2013
-----------

* New Features:

Added APRStt gateway capability.  For details, see:

APRStt-Implementation-Notes.pdf


-----------
Version 0.6	February 2013
-----------


* New Features:

Improved performance of AFSK demodulator.
Now decodes 965 frames from Track 2 of WA8LMF<4D>s TNC Test CD.

KISS protocol now available thru a TCP socket.
Default port is 8001.
Change it with KISSPORT option in configuration file.

Ability to salvage frames with bad FCS.
See section mentioning "bad apple" in the user guide.
Default of fixing 1 bit works well.  
Fixing more bits not recommended because there is a high
probability of occasional corrupted data getting thru.

Added AGW "monitor" format messages.
Now compatible with APRS-TW for telemetry.


* Bugs Fixed:

None.


* Known Problem:

The Linux (but not Cygwin) version eventually hangs if nothing is
reading from the KISS pseudo terminal.  Some operating system
queue fills up, the application write blocks, and decoding stops.


* Workaround:

If another application is not using the serial KISS interface,
run this in another window:

	tail -f /tmp/kisstnc


-----------
Version 0.5	March 2012
-----------


More error checking and messages for invalid APRS data.


-----------
Version 0.4	September 2011
-----------

First general availability.
-												Version 1.0 - Initial commit

 Changes to be committed:
	new file:   .gitattributes
	new file:   .gitignore
	new file:   APRStt-Implementation-Notes.pdf
	new file:   CHANGES.txt
	new file:   LICENSE-dire-wolf.txt
	new file:   LICENSE-other.txt
	new file:   Makefile.linux
	new file:   Makefile.win
	new file:   Quick-Start-Guide-Windows.pdf
	new file:   Raspberry-Pi-APRS.pdf
	new file:   User-Guide.pdf
	new file:   aclients.c
	new file:   aprs_tt.c
	new file:   aprs_tt.h
	new file:   atest.c
	new file:   audio.c
	new file:   audio.h
	new file:   audio_win.c
	new file:   ax25_pad.c
	new file:   ax25_pad.h
	new file:   beacon.c
	new file:   beacon.h
	new file:   config.c
	new file:   config.h
	new file:   decode_aprs.c
	new file:   decode_aprs.h
	new file:   dedupe.c
	new file:   dedupe.h
	new file:   demod.c
	new file:   demod.h
	new file:   demod_9600.c
	new file:   demod_9600.h
	new file:   demod_afsk.c
	new file:   demod_afsk.h
	new file:   digipeater.c
	new file:   digipeater.h
	new file:   direwolf.c
	new file:   direwolf.conf
	new file:   direwolf.desktop
	new file:   direwolf.h
	new file:   dsp.c
	new file:   dsp.h
	new file:   dtmf.c
	new file:   dtmf.h
	new file:   dw-icon.ico
	new file:   dw-icon.png
	new file:   dw-icon.rc
	new file:   dw-start.sh
	new file:   dwgps.c
	new file:   dwgps.h
	new file:   encode_aprs.c
	new file:   encode_aprs.h
	new file:   fcs_calc.c
	new file:   fcs_calc.h
	new file:   fsk_demod_agc.h
	new file:   fsk_demod_state.h
	new file:   fsk_filters.h
	new file:   fsk_gen_filter.h
	new file:   gen_packets.c
	new file:   gen_tone.c
	new file:   gen_tone.h
	new file:   hdlc_rec.c
	new file:   hdlc_rec.h
	new file:   hdlc_rec2.c
	new file:   hdlc_rec2.h
	new file:   hdlc_send.c
	new file:   hdlc_send.h
	new file:   igate.c
	new file:   igate.h
	new file:   kiss.c
	new file:   kiss.h
	new file:   kiss_frame.c
	new file:   kiss_frame.h
	new file:   kissnet.c
	new file:   kissnet.h
	new file:   latlong.c
	new file:   latlong.h
	new file:   ll2utm.c
	new file:   misc/README-dire-wolf.txt
	new file:   misc/strcasestr.c
	new file:   misc/strsep.c
	new file:   misc/strtok_r.c
	new file:   morse.c
	new file:   multi_modem.c
	new file:   multi_modem.h
	new file:   ptt.c
	new file:   ptt.h
	new file:   pttest.c
	new file:   rdq.c
	new file:   rdq.h
	new file:   redecode.c
	new file:   redecode.h
	new file:   regex/COPYING
	new file:   regex/INSTALL
	new file:   regex/LICENSES
	new file:   regex/NEWS
	new file:   regex/README
	new file:   regex/README-dire-wolf.txt
	new file:   regex/re_comp.h
	new file:   regex/regcomp.c
	new file:   regex/regex.c
	new file:   regex/regex.h
	new file:   regex/regex_internal.c
	new file:   regex/regex_internal.h
	new file:   regex/regexec.c
	new file:   rrbb.c
	new file:   rrbb.h
	new file:   server.c
	new file:   server.h
	new file:   symbols-new.txt
	new file:   symbols.c
	new file:   symbols.h
	new file:   symbolsX.txt
	new file:   textcolor.c
	new file:   textcolor.h
	new file:   tocalls.txt
	new file:   tq.c
	new file:   tq.h
	new file:   tt_text.c
	new file:   tt_text.h
	new file:   tt_user.c
	new file:   tt_user.h
	new file:   tune.h
	new file:   udp_test.c
	new file:   utm/LatLong-UTMconversion.c
	new file:   utm/LatLong-UTMconversion.h
	new file:   utm/README.txt
	new file:   utm/SwissGrid.cpp
	new file:   utm/UTMConversions.cpp
	new file:   utm/constants.h
	new file:   utm2ll.c
	new file:   version.h
	new file:   xmit.c
	new file:   xmit.h

											
										
										
											2015-07-27 00:35:07 +00:00
+								----------------
 								Revision history
 								----------------
-												Version 1.1

	modified:   .gitattributes
	modified:   APRStt-Implementation-Notes.pdf
	modified:   CHANGES.txt
	modified:   Makefile.linux
	modified:   Makefile.win
	new file:   Raspberry-Pi-APRS-Tracker.pdf
	modified:   Raspberry-Pi-APRS.pdf
	modified:   User-Guide.pdf
	modified:   aclients.c
	modified:   aprs_tt.c
	modified:   aprs_tt.h
	modified:   atest.c
	modified:   audio.c
	modified:   audio.h
	modified:   audio_win.c
	modified:   ax25_pad.c
	modified:   ax25_pad.h
	modified:   beacon.c
	modified:   beacon.h
	modified:   config.c
	modified:   config.h
	modified:   decode_aprs.c
	modified:   decode_aprs.h
	modified:   demod_afsk.c
	modified:   digipeater.c
	modified:   digipeater.h
	modified:   direwolf.c
	modified:   direwolf.conf
	modified:   direwolf.h
	modified:   dsp.c
	modified:   dwgps.c
	modified:   encode_aprs.c
	modified:   encode_aprs.h
	modified:   fsk_demod_state.h
	new file:   grm_sym.h
	modified:   hdlc_rec.c
	modified:   hdlc_rec2.c
	modified:   hdlc_rec2.h
	modified:   kiss.c
	modified:   kiss_frame.c
	modified:   kiss_frame.h
	modified:   kissnet.c
	modified:   latlong.c
	modified:   latlong.h
	new file:   log.c
	new file:   log.h
	new file:   log2gpx.c
	new file:   mgn_icon.h
	modified:   misc/README-dire-wolf.txt
	modified:   multi_modem.c
	new file:   nmea.c
	new file:   nmea.h
	modified:   ptt.c
	modified:   rdq.c
	modified:   regex/README-dire-wolf.txt
	new file:   rpack.h
	modified:   rrbb.c
	modified:   rrbb.h
	modified:   server.c
	modified:   symbols-new.txt
	modified:   symbols.c
	modified:   symbolsX.txt
	new file:   telemetry.c
	new file:   telemetry.h
	modified:   textcolor.c
	modified:   tocalls.txt
	modified:   utm/README.txt
	modified:   version.h
	modified:   xmit.c
	modified:   xmit.h

											
										
										
											2015-07-27 01:05:48 +00:00
+								-----------
 								Version 1.1  -- December 2014
 								-----------
 								* Changes since beta test version.
 								It is still highly recommended, but no longer mandatory, that
 								beaconing be enabled for digipeating to work.
 								* Known problems.
 								Sometimes kissattach fails to connect with "direwolf -p".
 								The User Guide and Raspberry Pi APRS document have a couple work-arounds.
 								-----------
 								Version 1.1 -- Beta Test 1 -- November 2014
 								-----------
 								* New Features:
 								Logging of received packets and utility to convert log file
 								into GPX format.
 								AGW network port formerly allowed only one connection at a
 								time.  It can now accept 3 client applications at the same time.
 								(Same has not yet been done for network KISS port.)
 								Frequency / offset / tone standard formats are now recognized.
 								Non-standard attempts, in the comment, are often detected and
 								a message suggests the correct format.
 								Telemetry is now recognized.  Messages are printed for
 								usage that does not adhere to the published standard.
 								Tracker function transmits location from GPS position.
 								New configuration file options: TBEACON and SMARTBEACONING.
 								(For Linux only.   Warning - has not been well tested.)
 								Experimental packet regeneration feature for HF use.
 								Will be documented later if proves to be useful...
 								Several enhancements for trying to fix incorrect CRC.
 								- Additional types of attempts to fix a bad CRC.
 								- Optimized code to reduce execution time.
 								- Improved detection of duplicate packets from different fixup attempts.
 								- Set limit on number of packets in fix up later queue.
 								Beacon positions can be specified in either latitude / longitude
 								or UTM coordinates.
 								* Bugs fixed:
 								For Windows version, maximum serial port was COM9.
 								It is now possible to use COM10 and higher.
 								Fixed issue with KISS protocol decoder state that showed up
 								only with "binary" data in packets (e.g.  RMS Express).
 								An extra 00 byte was being appended to packets from AGW
 								network protocol 'K' messages.
 								Invalid data from an AGW client application could cause an
 								application crash.
 								OSS (audio interface for non-Linux versions of Unix) should
 								be better now.
-												Version 1.0 - Initial commit

 Changes to be committed:
	new file:   .gitattributes
	new file:   .gitignore
	new file:   APRStt-Implementation-Notes.pdf
	new file:   CHANGES.txt
	new file:   LICENSE-dire-wolf.txt
	new file:   LICENSE-other.txt
	new file:   Makefile.linux
	new file:   Makefile.win
	new file:   Quick-Start-Guide-Windows.pdf
	new file:   Raspberry-Pi-APRS.pdf
	new file:   User-Guide.pdf
	new file:   aclients.c
	new file:   aprs_tt.c
	new file:   aprs_tt.h
	new file:   atest.c
	new file:   audio.c
	new file:   audio.h
	new file:   audio_win.c
	new file:   ax25_pad.c
	new file:   ax25_pad.h
	new file:   beacon.c
	new file:   beacon.h
	new file:   config.c
	new file:   config.h
	new file:   decode_aprs.c
	new file:   decode_aprs.h
	new file:   dedupe.c
	new file:   dedupe.h
	new file:   demod.c
	new file:   demod.h
	new file:   demod_9600.c
	new file:   demod_9600.h
	new file:   demod_afsk.c
	new file:   demod_afsk.h
	new file:   digipeater.c
	new file:   digipeater.h
	new file:   direwolf.c
	new file:   direwolf.conf
	new file:   direwolf.desktop
	new file:   direwolf.h
	new file:   dsp.c
	new file:   dsp.h
	new file:   dtmf.c
	new file:   dtmf.h
	new file:   dw-icon.ico
	new file:   dw-icon.png
	new file:   dw-icon.rc
	new file:   dw-start.sh
	new file:   dwgps.c
	new file:   dwgps.h
	new file:   encode_aprs.c
	new file:   encode_aprs.h
	new file:   fcs_calc.c
	new file:   fcs_calc.h
	new file:   fsk_demod_agc.h
	new file:   fsk_demod_state.h
	new file:   fsk_filters.h
	new file:   fsk_gen_filter.h
	new file:   gen_packets.c
	new file:   gen_tone.c
	new file:   gen_tone.h
	new file:   hdlc_rec.c
	new file:   hdlc_rec.h
	new file:   hdlc_rec2.c
	new file:   hdlc_rec2.h
	new file:   hdlc_send.c
	new file:   hdlc_send.h
	new file:   igate.c
	new file:   igate.h
	new file:   kiss.c
	new file:   kiss.h
	new file:   kiss_frame.c
	new file:   kiss_frame.h
	new file:   kissnet.c
	new file:   kissnet.h
	new file:   latlong.c
	new file:   latlong.h
	new file:   ll2utm.c
	new file:   misc/README-dire-wolf.txt
	new file:   misc/strcasestr.c
	new file:   misc/strsep.c
	new file:   misc/strtok_r.c
	new file:   morse.c
	new file:   multi_modem.c
	new file:   multi_modem.h
	new file:   ptt.c
	new file:   ptt.h
	new file:   pttest.c
	new file:   rdq.c
	new file:   rdq.h
	new file:   redecode.c
	new file:   redecode.h
	new file:   regex/COPYING
	new file:   regex/INSTALL
	new file:   regex/LICENSES
	new file:   regex/NEWS
	new file:   regex/README
	new file:   regex/README-dire-wolf.txt
	new file:   regex/re_comp.h
	new file:   regex/regcomp.c
	new file:   regex/regex.c
	new file:   regex/regex.h
	new file:   regex/regex_internal.c
	new file:   regex/regex_internal.h
	new file:   regex/regexec.c
	new file:   rrbb.c
	new file:   rrbb.h
	new file:   server.c
	new file:   server.h
	new file:   symbols-new.txt
	new file:   symbols.c
	new file:   symbols.h
	new file:   symbolsX.txt
	new file:   textcolor.c
	new file:   textcolor.h
	new file:   tocalls.txt
	new file:   tq.c
	new file:   tq.h
	new file:   tt_text.c
	new file:   tt_text.h
	new file:   tt_user.c
	new file:   tt_user.h
	new file:   tune.h
	new file:   udp_test.c
	new file:   utm/LatLong-UTMconversion.c
	new file:   utm/LatLong-UTMconversion.h
	new file:   utm/README.txt
	new file:   utm/SwissGrid.cpp
	new file:   utm/UTMConversions.cpp
	new file:   utm/constants.h
	new file:   utm2ll.c
	new file:   version.h
	new file:   xmit.c
	new file:   xmit.h

											
										
										
											2015-07-27 00:35:07 +00:00
+								-----------
 								Version 1.0a	May 2014
 								-----------
 								* Bug fix:
 								Beacons sent directly to IGate server had incorrect source address.
 								-----------
 								Version 1.0	May 2014
 								-----------
 								* New Features:
 								Received audio can be obtained with a UDP socket or stdin.
 								This can be used to take audio from software defined radios
 								such as rtl_fm or gqrx.
 baud data rate.
 								New PBEACON and OBEACON configuration options. Previously
 								it was necessary to handcraft beacons.
 								Less CPU power required for 300 baud.  This is important
 								if you want to run a bunch of decoders at the same time
 								to tolerate off-frequency HF SSB signals.
 								Improved support for UTF-8 character set.
 								Improved troubleshooting display for APRStt macros.
-												Version 1.1

	modified:   .gitattributes
	modified:   APRStt-Implementation-Notes.pdf
	modified:   CHANGES.txt
	modified:   Makefile.linux
	modified:   Makefile.win
	new file:   Raspberry-Pi-APRS-Tracker.pdf
	modified:   Raspberry-Pi-APRS.pdf
	modified:   User-Guide.pdf
	modified:   aclients.c
	modified:   aprs_tt.c
	modified:   aprs_tt.h
	modified:   atest.c
	modified:   audio.c
	modified:   audio.h
	modified:   audio_win.c
	modified:   ax25_pad.c
	modified:   ax25_pad.h
	modified:   beacon.c
	modified:   beacon.h
	modified:   config.c
	modified:   config.h
	modified:   decode_aprs.c
	modified:   decode_aprs.h
	modified:   demod_afsk.c
	modified:   digipeater.c
	modified:   digipeater.h
	modified:   direwolf.c
	modified:   direwolf.conf
	modified:   direwolf.h
	modified:   dsp.c
	modified:   dwgps.c
	modified:   encode_aprs.c
	modified:   encode_aprs.h
	modified:   fsk_demod_state.h
	new file:   grm_sym.h
	modified:   hdlc_rec.c
	modified:   hdlc_rec2.c
	modified:   hdlc_rec2.h
	modified:   kiss.c
	modified:   kiss_frame.c
	modified:   kiss_frame.h
	modified:   kissnet.c
	modified:   latlong.c
	modified:   latlong.h
	new file:   log.c
	new file:   log.h
	new file:   log2gpx.c
	new file:   mgn_icon.h
	modified:   misc/README-dire-wolf.txt
	modified:   multi_modem.c
	new file:   nmea.c
	new file:   nmea.h
	modified:   ptt.c
	modified:   rdq.c
	modified:   regex/README-dire-wolf.txt
	new file:   rpack.h
	modified:   rrbb.c
	modified:   rrbb.h
	modified:   server.c
	modified:   symbols-new.txt
	modified:   symbols.c
	modified:   symbolsX.txt
	new file:   telemetry.c
	new file:   telemetry.h
	modified:   textcolor.c
	modified:   tocalls.txt
	modified:   utm/README.txt
	modified:   version.h
	modified:   xmit.c
	modified:   xmit.h

											
										
										
											2015-07-27 01:05:48 +00:00
+								In earlier versions, the DTMF decoder was always active because it
 								took a negligible amount of CPU time.  Unfortunately this sometimes
 								resulted in too many false positives from some other types of digital
 								transmissions heard on HF. Starting in version 1.0, the DTMF decoder
 								is enabled only when the APRStt gateway is configured.
-												Version 1.0 - Initial commit

 Changes to be committed:
	new file:   .gitattributes
	new file:   .gitignore
	new file:   APRStt-Implementation-Notes.pdf
	new file:   CHANGES.txt
	new file:   LICENSE-dire-wolf.txt
	new file:   LICENSE-other.txt
	new file:   Makefile.linux
	new file:   Makefile.win
	new file:   Quick-Start-Guide-Windows.pdf
	new file:   Raspberry-Pi-APRS.pdf
	new file:   User-Guide.pdf
	new file:   aclients.c
	new file:   aprs_tt.c
	new file:   aprs_tt.h
	new file:   atest.c
	new file:   audio.c
	new file:   audio.h
	new file:   audio_win.c
	new file:   ax25_pad.c
	new file:   ax25_pad.h
	new file:   beacon.c
	new file:   beacon.h
	new file:   config.c
	new file:   config.h
	new file:   decode_aprs.c
	new file:   decode_aprs.h
	new file:   dedupe.c
	new file:   dedupe.h
	new file:   demod.c
	new file:   demod.h
	new file:   demod_9600.c
	new file:   demod_9600.h
	new file:   demod_afsk.c
	new file:   demod_afsk.h
	new file:   digipeater.c
	new file:   digipeater.h
	new file:   direwolf.c
	new file:   direwolf.conf
	new file:   direwolf.desktop
	new file:   direwolf.h
	new file:   dsp.c
	new file:   dsp.h
	new file:   dtmf.c
	new file:   dtmf.h
	new file:   dw-icon.ico
	new file:   dw-icon.png
	new file:   dw-icon.rc
	new file:   dw-start.sh
	new file:   dwgps.c
	new file:   dwgps.h
	new file:   encode_aprs.c
	new file:   encode_aprs.h
	new file:   fcs_calc.c
	new file:   fcs_calc.h
	new file:   fsk_demod_agc.h
	new file:   fsk_demod_state.h
	new file:   fsk_filters.h
	new file:   fsk_gen_filter.h
	new file:   gen_packets.c
	new file:   gen_tone.c
	new file:   gen_tone.h
	new file:   hdlc_rec.c
	new file:   hdlc_rec.h
	new file:   hdlc_rec2.c
	new file:   hdlc_rec2.h
	new file:   hdlc_send.c
	new file:   hdlc_send.h
	new file:   igate.c
	new file:   igate.h
	new file:   kiss.c
	new file:   kiss.h
	new file:   kiss_frame.c
	new file:   kiss_frame.h
	new file:   kissnet.c
	new file:   kissnet.h
	new file:   latlong.c
	new file:   latlong.h
	new file:   ll2utm.c
	new file:   misc/README-dire-wolf.txt
	new file:   misc/strcasestr.c
	new file:   misc/strsep.c
	new file:   misc/strtok_r.c
	new file:   morse.c
	new file:   multi_modem.c
	new file:   multi_modem.h
	new file:   ptt.c
	new file:   ptt.h
	new file:   pttest.c
	new file:   rdq.c
	new file:   rdq.h
	new file:   redecode.c
	new file:   redecode.h
	new file:   regex/COPYING
	new file:   regex/INSTALL
	new file:   regex/LICENSES
	new file:   regex/NEWS
	new file:   regex/README
	new file:   regex/README-dire-wolf.txt
	new file:   regex/re_comp.h
	new file:   regex/regcomp.c
	new file:   regex/regex.c
	new file:   regex/regex.h
	new file:   regex/regex_internal.c
	new file:   regex/regex_internal.h
	new file:   regex/regexec.c
	new file:   rrbb.c
	new file:   rrbb.h
	new file:   server.c
	new file:   server.h
	new file:   symbols-new.txt
	new file:   symbols.c
	new file:   symbols.h
	new file:   symbolsX.txt
	new file:   textcolor.c
	new file:   textcolor.h
	new file:   tocalls.txt
	new file:   tq.c
	new file:   tq.h
	new file:   tt_text.c
	new file:   tt_text.h
	new file:   tt_user.c
	new file:   tt_user.h
	new file:   tune.h
	new file:   udp_test.c
	new file:   utm/LatLong-UTMconversion.c
	new file:   utm/LatLong-UTMconversion.h
	new file:   utm/README.txt
	new file:   utm/SwissGrid.cpp
	new file:   utm/UTMConversions.cpp
	new file:   utm/constants.h
	new file:   utm2ll.c
	new file:   version.h
	new file:   xmit.c
	new file:   xmit.h

											
										
										
											2015-07-27 00:35:07 +00:00
 								-----------
 								Version 0.9	November 2013
 								-----------
 								* New Features:
 								Selection of non-default audio device for Linux ALSA.
 								Simplified audio device set up for Raspberry Pi.
 								GPIO lines can be used for PTT on suitable Linux systems.
 								Improved 1200 baud decoder.
 								Multiple decoders per channel to tolerate HF SSB signals off frequency.
 								Command line option "-t 0" to disable text colors.
 								APRStt macros which allow short numeric only touch tone
 								sequences to be processed as much longer predefined sequences.
 								* Bugs Fixed:
 								Now works on 64 bit target.
 								* New Restriction for Windows version:
 								Minimum processor is now Pentium 3 or equivalent or later.
 								It's possible to run on something older but you will need
 								to rebuild it from source.
 								-----------
 								Version 0.8	August 2013
 								-----------
 								* New Features:
 								Internet Gateway (IGate) including IPv6 support.
 								Compatibility with YAAC.
 								Preemptive digipeating option.
 								KISS TNC should now work with connected AX.25 protocols
 								(e.g. AX25 for Linux), not just APRS.
 								-----------
 								Version 0.7	March 2013
 								-----------
 								* New Features:
 								Added APRStt gateway capability.  For details, see:
 								APRStt-Implementation-Notes.pdf
 								-----------
-												Version 1.1

	modified:   .gitattributes
	modified:   APRStt-Implementation-Notes.pdf
	modified:   CHANGES.txt
	modified:   Makefile.linux
	modified:   Makefile.win
	new file:   Raspberry-Pi-APRS-Tracker.pdf
	modified:   Raspberry-Pi-APRS.pdf
	modified:   User-Guide.pdf
	modified:   aclients.c
	modified:   aprs_tt.c
	modified:   aprs_tt.h
	modified:   atest.c
	modified:   audio.c
	modified:   audio.h
	modified:   audio_win.c
	modified:   ax25_pad.c
	modified:   ax25_pad.h
	modified:   beacon.c
	modified:   beacon.h
	modified:   config.c
	modified:   config.h
	modified:   decode_aprs.c
	modified:   decode_aprs.h
	modified:   demod_afsk.c
	modified:   digipeater.c
	modified:   digipeater.h
	modified:   direwolf.c
	modified:   direwolf.conf
	modified:   direwolf.h
	modified:   dsp.c
	modified:   dwgps.c
	modified:   encode_aprs.c
	modified:   encode_aprs.h
	modified:   fsk_demod_state.h
	new file:   grm_sym.h
	modified:   hdlc_rec.c
	modified:   hdlc_rec2.c
	modified:   hdlc_rec2.h
	modified:   kiss.c
	modified:   kiss_frame.c
	modified:   kiss_frame.h
	modified:   kissnet.c
	modified:   latlong.c
	modified:   latlong.h
	new file:   log.c
	new file:   log.h
	new file:   log2gpx.c
	new file:   mgn_icon.h
	modified:   misc/README-dire-wolf.txt
	modified:   multi_modem.c
	new file:   nmea.c
	new file:   nmea.h
	modified:   ptt.c
	modified:   rdq.c
	modified:   regex/README-dire-wolf.txt
	new file:   rpack.h
	modified:   rrbb.c
	modified:   rrbb.h
	modified:   server.c
	modified:   symbols-new.txt
	modified:   symbols.c
	modified:   symbolsX.txt
	new file:   telemetry.c
	new file:   telemetry.h
	modified:   textcolor.c
	modified:   tocalls.txt
	modified:   utm/README.txt
	modified:   version.h
	modified:   xmit.c
	modified:   xmit.h

											
										
										
											2015-07-27 01:05:48 +00:00
+								Version 0.6	February 2013
-												Version 1.0 - Initial commit

 Changes to be committed:
	new file:   .gitattributes
	new file:   .gitignore
	new file:   APRStt-Implementation-Notes.pdf
	new file:   CHANGES.txt
	new file:   LICENSE-dire-wolf.txt
	new file:   LICENSE-other.txt
	new file:   Makefile.linux
	new file:   Makefile.win
	new file:   Quick-Start-Guide-Windows.pdf
	new file:   Raspberry-Pi-APRS.pdf
	new file:   User-Guide.pdf
	new file:   aclients.c
	new file:   aprs_tt.c
	new file:   aprs_tt.h
	new file:   atest.c
	new file:   audio.c
	new file:   audio.h
	new file:   audio_win.c
	new file:   ax25_pad.c
	new file:   ax25_pad.h
	new file:   beacon.c
	new file:   beacon.h
	new file:   config.c
	new file:   config.h
	new file:   decode_aprs.c
	new file:   decode_aprs.h
	new file:   dedupe.c
	new file:   dedupe.h
	new file:   demod.c
	new file:   demod.h
	new file:   demod_9600.c
	new file:   demod_9600.h
	new file:   demod_afsk.c
	new file:   demod_afsk.h
	new file:   digipeater.c
	new file:   digipeater.h
	new file:   direwolf.c
	new file:   direwolf.conf
	new file:   direwolf.desktop
	new file:   direwolf.h
	new file:   dsp.c
	new file:   dsp.h
	new file:   dtmf.c
	new file:   dtmf.h
	new file:   dw-icon.ico
	new file:   dw-icon.png
	new file:   dw-icon.rc
	new file:   dw-start.sh
	new file:   dwgps.c
	new file:   dwgps.h
	new file:   encode_aprs.c
	new file:   encode_aprs.h
	new file:   fcs_calc.c
	new file:   fcs_calc.h
	new file:   fsk_demod_agc.h
	new file:   fsk_demod_state.h
	new file:   fsk_filters.h
	new file:   fsk_gen_filter.h
	new file:   gen_packets.c
	new file:   gen_tone.c
	new file:   gen_tone.h
	new file:   hdlc_rec.c
	new file:   hdlc_rec.h
	new file:   hdlc_rec2.c
	new file:   hdlc_rec2.h
	new file:   hdlc_send.c
	new file:   hdlc_send.h
	new file:   igate.c
	new file:   igate.h
	new file:   kiss.c
	new file:   kiss.h
	new file:   kiss_frame.c
	new file:   kiss_frame.h
	new file:   kissnet.c
	new file:   kissnet.h
	new file:   latlong.c
	new file:   latlong.h
	new file:   ll2utm.c
	new file:   misc/README-dire-wolf.txt
	new file:   misc/strcasestr.c
	new file:   misc/strsep.c
	new file:   misc/strtok_r.c
	new file:   morse.c
	new file:   multi_modem.c
	new file:   multi_modem.h
	new file:   ptt.c
	new file:   ptt.h
	new file:   pttest.c
	new file:   rdq.c
	new file:   rdq.h
	new file:   redecode.c
	new file:   redecode.h
	new file:   regex/COPYING
	new file:   regex/INSTALL
	new file:   regex/LICENSES
	new file:   regex/NEWS
	new file:   regex/README
	new file:   regex/README-dire-wolf.txt
	new file:   regex/re_comp.h
	new file:   regex/regcomp.c
	new file:   regex/regex.c
	new file:   regex/regex.h
	new file:   regex/regex_internal.c
	new file:   regex/regex_internal.h
	new file:   regex/regexec.c
	new file:   rrbb.c
	new file:   rrbb.h
	new file:   server.c
	new file:   server.h
	new file:   symbols-new.txt
	new file:   symbols.c
	new file:   symbols.h
	new file:   symbolsX.txt
	new file:   textcolor.c
	new file:   textcolor.h
	new file:   tocalls.txt
	new file:   tq.c
	new file:   tq.h
	new file:   tt_text.c
	new file:   tt_text.h
	new file:   tt_user.c
	new file:   tt_user.h
	new file:   tune.h
	new file:   udp_test.c
	new file:   utm/LatLong-UTMconversion.c
	new file:   utm/LatLong-UTMconversion.h
	new file:   utm/README.txt
	new file:   utm/SwissGrid.cpp
	new file:   utm/UTMConversions.cpp
	new file:   utm/constants.h
	new file:   utm2ll.c
	new file:   version.h
	new file:   xmit.c
	new file:   xmit.h

											
										
										
											2015-07-27 00:35:07 +00:00
+								-----------
 								* New Features:
 								Improved performance of AFSK demodulator.
 								Now decodes 965 frames from Track 2 of WA8LMF<4D>s TNC Test CD.
 								KISS protocol now available thru a TCP socket.
 								Default port is 8001.
 								Change it with KISSPORT option in configuration file.
 								Ability to salvage frames with bad FCS.
 								See section mentioning "bad apple" in the user guide.
 								Default of fixing 1 bit works well.
 								Fixing more bits not recommended because there is a high
 								probability of occasional corrupted data getting thru.
 								Added AGW "monitor" format messages.
 								Now compatible with APRS-TW for telemetry.
 								* Bugs Fixed:
 								None.
 								* Known Problem:
 								The Linux (but not Cygwin) version eventually hangs if nothing is
 								reading from the KISS pseudo terminal.  Some operating system
 								queue fills up, the application write blocks, and decoding stops.
 								* Workaround:
 								If another application is not using the serial KISS interface,
 								run this in another window:
 									tail -f /tmp/kisstnc
 								-----------
-												Version 1.1

	modified:   .gitattributes
	modified:   APRStt-Implementation-Notes.pdf
	modified:   CHANGES.txt
	modified:   Makefile.linux
	modified:   Makefile.win
	new file:   Raspberry-Pi-APRS-Tracker.pdf
	modified:   Raspberry-Pi-APRS.pdf
	modified:   User-Guide.pdf
	modified:   aclients.c
	modified:   aprs_tt.c
	modified:   aprs_tt.h
	modified:   atest.c
	modified:   audio.c
	modified:   audio.h
	modified:   audio_win.c
	modified:   ax25_pad.c
	modified:   ax25_pad.h
	modified:   beacon.c
	modified:   beacon.h
	modified:   config.c
	modified:   config.h
	modified:   decode_aprs.c
	modified:   decode_aprs.h
	modified:   demod_afsk.c
	modified:   digipeater.c
	modified:   digipeater.h
	modified:   direwolf.c
	modified:   direwolf.conf
	modified:   direwolf.h
	modified:   dsp.c
	modified:   dwgps.c
	modified:   encode_aprs.c
	modified:   encode_aprs.h
	modified:   fsk_demod_state.h
	new file:   grm_sym.h
	modified:   hdlc_rec.c
	modified:   hdlc_rec2.c
	modified:   hdlc_rec2.h
	modified:   kiss.c
	modified:   kiss_frame.c
	modified:   kiss_frame.h
	modified:   kissnet.c
	modified:   latlong.c
	modified:   latlong.h
	new file:   log.c
	new file:   log.h
	new file:   log2gpx.c
	new file:   mgn_icon.h
	modified:   misc/README-dire-wolf.txt
	modified:   multi_modem.c
	new file:   nmea.c
	new file:   nmea.h
	modified:   ptt.c
	modified:   rdq.c
	modified:   regex/README-dire-wolf.txt
	new file:   rpack.h
	modified:   rrbb.c
	modified:   rrbb.h
	modified:   server.c
	modified:   symbols-new.txt
	modified:   symbols.c
	modified:   symbolsX.txt
	new file:   telemetry.c
	new file:   telemetry.h
	modified:   textcolor.c
	modified:   tocalls.txt
	modified:   utm/README.txt
	modified:   version.h
	modified:   xmit.c
	modified:   xmit.h

											
										
										
											2015-07-27 01:05:48 +00:00
+								Version 0.5	March 2012
-												Version 1.0 - Initial commit

 Changes to be committed:
	new file:   .gitattributes
	new file:   .gitignore
	new file:   APRStt-Implementation-Notes.pdf
	new file:   CHANGES.txt
	new file:   LICENSE-dire-wolf.txt
	new file:   LICENSE-other.txt
	new file:   Makefile.linux
	new file:   Makefile.win
	new file:   Quick-Start-Guide-Windows.pdf
	new file:   Raspberry-Pi-APRS.pdf
	new file:   User-Guide.pdf
	new file:   aclients.c
	new file:   aprs_tt.c
	new file:   aprs_tt.h
	new file:   atest.c
	new file:   audio.c
	new file:   audio.h
	new file:   audio_win.c
	new file:   ax25_pad.c
	new file:   ax25_pad.h
	new file:   beacon.c
	new file:   beacon.h
	new file:   config.c
	new file:   config.h
	new file:   decode_aprs.c
	new file:   decode_aprs.h
	new file:   dedupe.c
	new file:   dedupe.h
	new file:   demod.c
	new file:   demod.h
	new file:   demod_9600.c
	new file:   demod_9600.h
	new file:   demod_afsk.c
	new file:   demod_afsk.h
	new file:   digipeater.c
	new file:   digipeater.h
	new file:   direwolf.c
	new file:   direwolf.conf
	new file:   direwolf.desktop
	new file:   direwolf.h
	new file:   dsp.c
	new file:   dsp.h
	new file:   dtmf.c
	new file:   dtmf.h
	new file:   dw-icon.ico
	new file:   dw-icon.png
	new file:   dw-icon.rc
	new file:   dw-start.sh
	new file:   dwgps.c
	new file:   dwgps.h
	new file:   encode_aprs.c
	new file:   encode_aprs.h
	new file:   fcs_calc.c
	new file:   fcs_calc.h
	new file:   fsk_demod_agc.h
	new file:   fsk_demod_state.h
	new file:   fsk_filters.h
	new file:   fsk_gen_filter.h
	new file:   gen_packets.c
	new file:   gen_tone.c
	new file:   gen_tone.h
	new file:   hdlc_rec.c
	new file:   hdlc_rec.h
	new file:   hdlc_rec2.c
	new file:   hdlc_rec2.h
	new file:   hdlc_send.c
	new file:   hdlc_send.h
	new file:   igate.c
	new file:   igate.h
	new file:   kiss.c
	new file:   kiss.h
	new file:   kiss_frame.c
	new file:   kiss_frame.h
	new file:   kissnet.c
	new file:   kissnet.h
	new file:   latlong.c
	new file:   latlong.h
	new file:   ll2utm.c
	new file:   misc/README-dire-wolf.txt
	new file:   misc/strcasestr.c
	new file:   misc/strsep.c
	new file:   misc/strtok_r.c
	new file:   morse.c
	new file:   multi_modem.c
	new file:   multi_modem.h
	new file:   ptt.c
	new file:   ptt.h
	new file:   pttest.c
	new file:   rdq.c
	new file:   rdq.h
	new file:   redecode.c
	new file:   redecode.h
	new file:   regex/COPYING
	new file:   regex/INSTALL
	new file:   regex/LICENSES
	new file:   regex/NEWS
	new file:   regex/README
	new file:   regex/README-dire-wolf.txt
	new file:   regex/re_comp.h
	new file:   regex/regcomp.c
	new file:   regex/regex.c
	new file:   regex/regex.h
	new file:   regex/regex_internal.c
	new file:   regex/regex_internal.h
	new file:   regex/regexec.c
	new file:   rrbb.c
	new file:   rrbb.h
	new file:   server.c
	new file:   server.h
	new file:   symbols-new.txt
	new file:   symbols.c
	new file:   symbols.h
	new file:   symbolsX.txt
	new file:   textcolor.c
	new file:   textcolor.h
	new file:   tocalls.txt
	new file:   tq.c
	new file:   tq.h
	new file:   tt_text.c
	new file:   tt_text.h
	new file:   tt_user.c
	new file:   tt_user.h
	new file:   tune.h
	new file:   udp_test.c
	new file:   utm/LatLong-UTMconversion.c
	new file:   utm/LatLong-UTMconversion.h
	new file:   utm/README.txt
	new file:   utm/SwissGrid.cpp
	new file:   utm/UTMConversions.cpp
	new file:   utm/constants.h
	new file:   utm2ll.c
	new file:   version.h
	new file:   xmit.c
	new file:   xmit.h

											
										
										
											2015-07-27 00:35:07 +00:00
+								-----------
 								More error checking and messages for invalid APRS data.
 								-----------
-												Version 1.1

	modified:   .gitattributes
	modified:   APRStt-Implementation-Notes.pdf
	modified:   CHANGES.txt
	modified:   Makefile.linux
	modified:   Makefile.win
	new file:   Raspberry-Pi-APRS-Tracker.pdf
	modified:   Raspberry-Pi-APRS.pdf
	modified:   User-Guide.pdf
	modified:   aclients.c
	modified:   aprs_tt.c
	modified:   aprs_tt.h
	modified:   atest.c
	modified:   audio.c
	modified:   audio.h
	modified:   audio_win.c
	modified:   ax25_pad.c
	modified:   ax25_pad.h
	modified:   beacon.c
	modified:   beacon.h
	modified:   config.c
	modified:   config.h
	modified:   decode_aprs.c
	modified:   decode_aprs.h
	modified:   demod_afsk.c
	modified:   digipeater.c
	modified:   digipeater.h
	modified:   direwolf.c
	modified:   direwolf.conf
	modified:   direwolf.h
	modified:   dsp.c
	modified:   dwgps.c
	modified:   encode_aprs.c
	modified:   encode_aprs.h
	modified:   fsk_demod_state.h
	new file:   grm_sym.h
	modified:   hdlc_rec.c
	modified:   hdlc_rec2.c
	modified:   hdlc_rec2.h
	modified:   kiss.c
	modified:   kiss_frame.c
	modified:   kiss_frame.h
	modified:   kissnet.c
	modified:   latlong.c
	modified:   latlong.h
	new file:   log.c
	new file:   log.h
	new file:   log2gpx.c
	new file:   mgn_icon.h
	modified:   misc/README-dire-wolf.txt
	modified:   multi_modem.c
	new file:   nmea.c
	new file:   nmea.h
	modified:   ptt.c
	modified:   rdq.c
	modified:   regex/README-dire-wolf.txt
	new file:   rpack.h
	modified:   rrbb.c
	modified:   rrbb.h
	modified:   server.c
	modified:   symbols-new.txt
	modified:   symbols.c
	modified:   symbolsX.txt
	new file:   telemetry.c
	new file:   telemetry.h
	modified:   textcolor.c
	modified:   tocalls.txt
	modified:   utm/README.txt
	modified:   version.h
	modified:   xmit.c
	modified:   xmit.h

											
										
										
											2015-07-27 01:05:48 +00:00
+								Version 0.4	September 2011
-												Version 1.0 - Initial commit

 Changes to be committed:
	new file:   .gitattributes
	new file:   .gitignore
	new file:   APRStt-Implementation-Notes.pdf
	new file:   CHANGES.txt
	new file:   LICENSE-dire-wolf.txt
	new file:   LICENSE-other.txt
	new file:   Makefile.linux
	new file:   Makefile.win
	new file:   Quick-Start-Guide-Windows.pdf
	new file:   Raspberry-Pi-APRS.pdf
	new file:   User-Guide.pdf
	new file:   aclients.c
	new file:   aprs_tt.c
	new file:   aprs_tt.h
	new file:   atest.c
	new file:   audio.c
	new file:   audio.h
	new file:   audio_win.c
	new file:   ax25_pad.c
	new file:   ax25_pad.h
	new file:   beacon.c
	new file:   beacon.h
	new file:   config.c
	new file:   config.h
	new file:   decode_aprs.c
	new file:   decode_aprs.h
	new file:   dedupe.c
	new file:   dedupe.h
	new file:   demod.c
	new file:   demod.h
	new file:   demod_9600.c
	new file:   demod_9600.h
	new file:   demod_afsk.c
	new file:   demod_afsk.h
	new file:   digipeater.c
	new file:   digipeater.h
	new file:   direwolf.c
	new file:   direwolf.conf
	new file:   direwolf.desktop
	new file:   direwolf.h
	new file:   dsp.c
	new file:   dsp.h
	new file:   dtmf.c
	new file:   dtmf.h
	new file:   dw-icon.ico
	new file:   dw-icon.png
	new file:   dw-icon.rc
	new file:   dw-start.sh
	new file:   dwgps.c
	new file:   dwgps.h
	new file:   encode_aprs.c
	new file:   encode_aprs.h
	new file:   fcs_calc.c
	new file:   fcs_calc.h
	new file:   fsk_demod_agc.h
	new file:   fsk_demod_state.h
	new file:   fsk_filters.h
	new file:   fsk_gen_filter.h
	new file:   gen_packets.c
	new file:   gen_tone.c
	new file:   gen_tone.h
	new file:   hdlc_rec.c
	new file:   hdlc_rec.h
	new file:   hdlc_rec2.c
	new file:   hdlc_rec2.h
	new file:   hdlc_send.c
	new file:   hdlc_send.h
	new file:   igate.c
	new file:   igate.h
	new file:   kiss.c
	new file:   kiss.h
	new file:   kiss_frame.c
	new file:   kiss_frame.h
	new file:   kissnet.c
	new file:   kissnet.h
	new file:   latlong.c
	new file:   latlong.h
	new file:   ll2utm.c
	new file:   misc/README-dire-wolf.txt
	new file:   misc/strcasestr.c
	new file:   misc/strsep.c
	new file:   misc/strtok_r.c
	new file:   morse.c
	new file:   multi_modem.c
	new file:   multi_modem.h
	new file:   ptt.c
	new file:   ptt.h
	new file:   pttest.c
	new file:   rdq.c
	new file:   rdq.h
	new file:   redecode.c
	new file:   redecode.h
	new file:   regex/COPYING
	new file:   regex/INSTALL
	new file:   regex/LICENSES
	new file:   regex/NEWS
	new file:   regex/README
	new file:   regex/README-dire-wolf.txt
	new file:   regex/re_comp.h
	new file:   regex/regcomp.c
	new file:   regex/regex.c
	new file:   regex/regex.h
	new file:   regex/regex_internal.c
	new file:   regex/regex_internal.h
	new file:   regex/regexec.c
	new file:   rrbb.c
	new file:   rrbb.h
	new file:   server.c
	new file:   server.h
	new file:   symbols-new.txt
	new file:   symbols.c
	new file:   symbols.h
	new file:   symbolsX.txt
	new file:   textcolor.c
	new file:   textcolor.h
	new file:   tocalls.txt
	new file:   tq.c
	new file:   tq.h
	new file:   tt_text.c
	new file:   tt_text.h
	new file:   tt_user.c
	new file:   tt_user.h
	new file:   tune.h
	new file:   udp_test.c
	new file:   utm/LatLong-UTMconversion.c
	new file:   utm/LatLong-UTMconversion.h
	new file:   utm/README.txt
	new file:   utm/SwissGrid.cpp
	new file:   utm/UTMConversions.cpp
	new file:   utm/constants.h
	new file:   utm2ll.c
	new file:   version.h
	new file:   xmit.c
	new file:   xmit.h

											
										
										
											2015-07-27 00:35:07 +00:00
+								-----------
 								First general availability.