PierMesh
/
direwolf
mirror of https://github.com/wb2osz/direwolf.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
direwolf/Makefile.macosx

580 lines
20 KiB
Makefile
Raw Blame History

#
# Makefile for Macintosh 10.8+ version of Dire Wolf.
#
# TODO: This is a modified version of Makefile.linux and it
# has fallen a little behind. For example, it is missing the check target.
# It would be more maintainable if we could use a single file for both.
# The differences are not that great.
# Maybe the most of the differences could go in to platform specific include
# files rather than cluttering it up with too many if blocks.
all : direwolf decode_aprs text2tt tt2text ll2utm utm2ll aclients atest log2gpx gen_packets ttcalc direwolf.conf
@echo " "
@echo "Next step install with: "
@echo " "
@echo " sudo make install"
@echo " "
@echo "System SDK's (10.8 - 10.10) must be located here to make use of them. "
@echo " /Developer/SDKs "
@echo " "
SDK_PATH := $(shell xcrun --show-sdk-path)
SDK_VERSION := $(shell xcrun --show-sdk-version)
SYS_LIBS := -isystem ${SDK_PATH}
SYS_MIN := -mmacosx-version-min=${SDK_VERSION}
EXTRA_CFLAGS :=
DARWIN_CC := $(shell which clang)
ifeq (${DARWIN_CC},)
DARWIN_CC := $(shell which gcc)
EXTRA_CFLAGS :=
else
EXTRA_CFLAGS := -fvectorize -fslp-vectorize -fslp-vectorize-aggressive -pthread
endif
# Change as required in support of the available libraries
#CC := $(DARWIN_CC) -m64 $(SYS_LIBS) $(SYS_MIN)
CC := $(DARWIN_CC) -m32 $(SYS_LIBS) $(SYS_MIN)
CFLAGS := -Os -pthread -Igeotranz $(EXTRA_CFLAGS)
# $(info $$CC is [${CC}])
#
# The DSP filters spend a lot of time spinning around in little
# loops multiplying and adding arrays of numbers. The Intel "SSE"
# instructions, introduced in 1999 with the Pentium III series,
# can speed this up considerably.
#
# SSE2 instructions, added in 2000, don't seem to offer any advantage.
#
#
# Let's take a look at the effect of the compile options.
#
#
# Times are elapsed time to process Track 2 of the TNC test CD.
#
# i.e. "./atest 02_Track_2.wav"
# Default demodulator type is new "E" added for version 1.2.
#
#
# ---------- x86 (32 bit) ----------
#
#
# gcc 4.6.3 running on Ubuntu 12.04.05.
# Intel(R) Celeron(R) CPU 2.53GHz. Appears to have only 32 bit instructions.
# Probably from around 2004 or 2005.
#
# When gcc is generating code for a 32 bit x86 target, it assumes the ancient
# i386 processor. This is good for portability but bad for performance.
#
# The code can run considerably faster by taking advantage of the SSE instructions
# available in the Pentium 3 or later.
#
# seconds options comments
# ------ ------- --------
# 524
# 183 -O2
# 182 -O3
# 183 -O3 -ffast-math (should be same as -Ofast)
# 184 -Ofast
# 189 -O3 -ffast-math -march=pentium
# 122 -O3 -ffast-math -msse
# 122 -O3 -ffast-math -march=pentium -msse
# 121 -O3 -ffast-math -march=pentium3 (this implies -msse)
# 120 -O3 -ffast-math -march=native
#
# Note that "-march=native" is essentially the same as "-march=pentium3."
#
# If the compiler is generating code for the i386 target, we can
# get much better results by telling it we have at least a Pentium 3.
CFLAGS += -march=core2 -msse4.1 -std=gnu99
#CFLAGS += -march=pentium3 -sse
#
# gcc 4.8.2 running on Ubuntu 14.04.1.
# Intel Core 2 Duo from around 2007 or 2008.
#
# 64 bit target implies that we have SSE and probably even better vector instructions.
#
# seconds options comments
# ------ ------- --------
# 245
# 75 -01
# 72 -02
# 71 -03
# 73 -O3 -march=native
# 42 -O3 -ffast-math
# 42 -Ofast (note below)
# 40 -O3 -ffast-math -march=native
#
#
# Note that "-Ofast" is a newer option roughly equivalent to "-O3 -ffast-math".
# I use the longer form because it is compatible with older compilers.
#
# Why don't I don't have "-march=native?"
# Older compilers don't recognize "native" as one of the valid options.
# One article said it was added with gcc 4.2 but I haven't verified that.
#
# Add -ffastmath in only if compiler version recognizes it.
useffast := $(shell gcc --help -v 2>/dev/null | grep ffast-math)
ifneq ($(useffast),)
CFLAGS += -ffast-math
endif
#
# You would expect "-march=native" to produce the fastest code.
# Why don't I use it here?
#
# 1. In my benchmarks, above, it has a negligible impact if any at all.
# 2. Some older versions of gcc don't recognize "native" as a valid choice.
# 3. Results are less portable. Not a consideration if you are
# building only for your own use but very important for anyone
# redistributing a "binary" version.
#
# If you are planning to distribute the binary version to other
# people (in some ham radio software collection, RPM, or DEB package),
# avoid # fine tuning it for your particular computer. It could
# cause compatibility issues for those with older computers.
#
#CFLAGS += -D_FORTIFY_SOURCE
# Use PortAudio Library
# Force static linking of portaudio if the static library is available.
PA_LIB_STATIC := $(shell find /usr/local/lib -maxdepth 1 -type f -name "libportaudio.a")
#$(info $$PA_LIB_STATIC is [${PA_LIB_STATIC}])
ifeq (${PA_LIB_STATIC},)
LDLIBS += -L/usr/local/lib -lportaudio
else
LDLIBS += /usr/local/lib/libportaudio.a
endif
# Include libraries portaudio requires.
LDLIBS += -framework CoreAudio -framework AudioUnit -framework AudioToolbox
LDLIBS += -framework Foundation -framework CoreServices
CFLAGS += -DUSE_PORTAUDIO -I/usr/local/include
# Uncomment following lines to enable GPS interface & tracker function.
# Not available for MacOSX.
# Although MacPorts has gpsd, wonder if it's the same thing.
#CFLAGS += -DENABLE_GPSD
#LDLIBS += -lgps
# Name of current directory.
# Used to generate zip file name for distribution.
z := $(notdir ${CURDIR})
# Main application.
direwolf : direwolf.o aprs_tt.o audio_portaudio.o audio_stats.o ax25_pad.o beacon.o \
config.o decode_aprs.o dedupe.o demod_9600.o demod_afsk.o \
demod.o digipeater.o dlq.o dsp.o dtime_now.o dtmf.o dwgps.o \
encode_aprs.o encode_aprs.o fcs_calc.o fcs_calc.o gen_tone.o \
geotranz.a hdlc_rec.o hdlc_rec2.o hdlc_send.o igate.o kiss_frame.o \
kiss.o kissnet.o latlong.o latlong.o log.o morse.o multi_modem.o \
nmea.o serial_port.o pfilter.o ptt.o rdq.o recv.o redecode.o rrbb.o server.o \
symbols.o telemetry.o textcolor.o tq.o tt_text.o tt_user.o xmit.o \
dwgps.o dwgpsnmea.o dwgpsd.o
$(CC) $(CFLAGS) -o $@ $^ -lpthread $(LDLIBS) -lm
# Optimization for slow processors.
demod.o : fsk_fast_filter.h
demod_afsk.o : fsk_fast_filter.h
fsk_fast_filter.h : demod_afsk.c
$(CC) $(CFLAGS) -o gen_fff -DGEN_FFF demod_afsk.c dsp.c textcolor.c -lm
./gen_fff > fsk_fast_filter.h
# UTM, USNG, MGRS conversions.
geotranz.a : error_string.o mgrs.o polarst.o tranmerc.o ups.o usng.o utm.o
ar -cr $@ $^
error_string.o : geotranz/error_string.c
$(CC) $(CFLAGS) -c -o $@ $^
mgrs.o : geotranz/mgrs.c
$(CC) $(CFLAGS) -c -o $@ $^
polarst.o : geotranz/polarst.c
$(CC) $(CFLAGS) -c -o $@ $^
tranmerc.o : geotranz/tranmerc.c
$(CC) $(CFLAGS) -c -o $@ $^
ups.o : geotranz/ups.c
$(CC) $(CFLAGS) -c -o $@ $^
usng.o : geotranz/usng.c
$(CC) $(CFLAGS) -c -o $@ $^
utm.o : geotranz/utm.c
$(CC) $(CFLAGS) -c -o $@ $^
# Generate apprpriate sample configuration file for this platform.
direwolf.conf : generic.conf
egrep '^C|^M' generic.conf | cut -c2-999 > direwolf.conf
# Where should we install it?
# My understanding, of the convention, is that something you compile
# from source, that is not a standard part of the operating system,
# should go in /usr/local/bin.
# This is a step in the right direction but not sufficient to use /usr instead.
INSTALLDIR := /usr/local
# TODO: Test this better.
# Optional installation into /usr/local/...
# Needs to be run as root or with sudo.
# TODO: Review file locations.
# Command to "install" to system directories. "install" for Linux. "ginstall" for Mac.
INSTALL=ginstall
.PHONY: install
install : $(APPS) direwolf.conf tocalls.txt symbols-new.txt symbolsX.txt dw-icon.png direwolf.desktop
#
# Applications, not installed with package manager, normally go in /usr/local/bin.
# /usr/bin is used instead when installing from .DEB or .RPM package.
#
$(INSTALL) direwolf $(INSTALLDIR)/bin
$(INSTALL) decode_aprs $(INSTALLDIR)/bin
$(INSTALL) text2tt $(INSTALLDIR)/bin
$(INSTALL) tt2text $(INSTALLDIR)/bin
$(INSTALL) ll2utm $(INSTALLDIR)/bin
$(INSTALL) utm2ll $(INSTALLDIR)/bin
$(INSTALL) aclients $(INSTALLDIR)/bin
$(INSTALL) log2gpx $(INSTALLDIR)/bin
$(INSTALL) gen_packets $(INSTALLDIR)/bin
$(INSTALL) atest $(INSTALLDIR)/bin
$(INSTALL) ttcalc $(INSTALLDIR)/bin
$(INSTALL) dwespeak.sh $(INSTALLDIR)/bin
#
# Telemetry Toolkit executables. Other .conf and .txt files will go into doc directory.
#
$(INSTALL) telemetry-toolkit/telem-balloon.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-bits.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-data.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-data91.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-eqns.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-parm.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-unit.pl $(INSTALLDIR)/bin
$(INSTALL) telemetry-toolkit/telem-volts.py $(INSTALLDIR)/bin
#
# Misc. data such as "tocall" to system mapping.
#
$(INSTALL) -D --mode=644 tocalls.txt /usr/share/direwolf/tocalls.txt
$(INSTALL) -D --mode=644 symbols-new.txt /usr/share/direwolf/symbols-new.txt
$(INSTALL) -D --mode=644 symbolsX.txt /usr/share/direwolf/symbolsX.txt
$(INSTALL) -D --mode=644 dw-icon.png /usr/share/direwolf/dw-icon.png
$(INSTALL) -D --mode=644 direwolf.desktop /usr/share/applications/direwolf.desktop
#
# Documentation. Various plain text files and PDF.
#
$(INSTALL) -D --mode=644 README.md $(INSTALLDIR)/share/doc/direwolf/README.md
$(INSTALL) -D --mode=644 CHANGES.md $(INSTALLDIR)/share/doc/direwolf/CHANGES.md
$(INSTALL) -D --mode=644 LICENSE-dire-wolf.txt $(INSTALLDIR)/share/doc/direwolf/LICENSE-dire-wolf.txt
$(INSTALL) -D --mode=644 LICENSE-other.txt $(INSTALLDIR)/share/doc/direwolf/LICENSE-other.txt
#
$(INSTALL) -D --mode=644 doc/User-Guide.pdf $(INSTALLDIR)/share/doc/direwolf/User-Guide.pdf
$(INSTALL) -D --mode=644 doc/Raspberry-Pi-APRS.pdf $(INSTALLDIR)/share/doc/direwolf/Raspberry-Pi-APRS.pdf
$(INSTALL) -D --mode=644 doc/Raspberry-Pi-APRS-Tracker.pdf $(INSTALLDIR)/share/doc/direwolf/Raspberry-Pi-APRS-Tracker.pdf
$(INSTALL) -D --mode=644 doc/Raspberry-Pi-SDR-IGate.pdf $(INSTALLDIR)/share/doc/direwolf/Raspberry-Pi-SDR-IGate.pdf
$(INSTALL) -D --mode=644 doc/APRStt-Implementation-Notes.pdf $(INSTALLDIR)/share/doc/direwolf/APRStt-Implementation-Notes.pdf
$(INSTALL) -D --mode=644 doc/APRStt-interface-for-SARTrack.pdf $(INSTALLDIR)/share/doc/direwolf/APRStt-interface-for-SARTrack.pdf
$(INSTALL) -D --mode=644 doc/APRS-Telemetry-Toolkit.pdf $(INSTALLDIR)/share/doc/direwolf/APRS-Telemetry-Toolkit.pdf
$(INSTALL) -D --mode=644 doc/A-Better-APRS-Packet-Demodulator-Part-1-1200-baud.pdf $(INSTALLDIR)/share/doc/direwolf/A-Better-APRS-Packet-Demodulator-Part-1-1200-baud.pdf
$(INSTALL) -D --mode=644 doc/A-Better-APRS-Packet-Demodulator-Part-2-9600-baud.pdf $(INSTALLDIR)/share/doc/direwolf/A-Better-APRS-Packet-Demodulator-Part-2-9600-baud.pdf
#
# Sample config files also go into the doc directory.
# When building from source, these can be put in home directory with "make install-conf".
# When installed from .DEB or .RPM package, the user will need to copy these to
# the home directory or other desired location.
# Someone suggested that these could go into an "examples" subdirectory under doc.
#
$(INSTALL) -D --mode=644 direwolf.conf $(INSTALLDIR)/share/doc/direwolf/direwolf.conf
$(INSTALL) -D --mode=644 telemetry-toolkit/telem-m0xer-3.txt $(INSTALLDIR)/share/doc/direwolf/telem-m0xer-3.txt
$(INSTALL) -D --mode=644 telemetry-toolkit/telem-balloon.conf $(INSTALLDIR)/share/doc/direwolf/telem-balloon.conf
$(INSTALL) -D --mode=644 telemetry-toolkit/telem-volts.conf $(INSTALLDIR)/share/doc/direwolf/telem-volts.conf
#
# "man" pages
#
$(INSTALL) -D --mode=644 man1/aclients.1 $(INSTALLDIR)/man/man1/aclients.1
$(INSTALL) -D --mode=644 man1/atest.1 $(INSTALLDIR)/man/man1/atest.1
$(INSTALL) -D --mode=644 man1/decode_aprs.1 $(INSTALLDIR)/man/man1/decode_aprs.1
$(INSTALL) -D --mode=644 man1/direwolf.1 $(INSTALLDIR)/man/man1/direwolf.1
$(INSTALL) -D --mode=644 man1/gen_packets.1 $(INSTALLDIR)/man/man1/gen_packets.1
$(INSTALL) -D --mode=644 man1/ll2utm.1 $(INSTALLDIR)/man/man1/ll2utm.1
$(INSTALL) -D --mode=644 man1/log2gpx.1 $(INSTALLDIR)/man/man1/log2gpx.1
$(INSTALL) -D --mode=644 man1/text2tt.1 $(INSTALLDIR)/man/man1/text2tt.1
$(INSTALL) -D --mode=644 man1/tt2text.1 $(INSTALLDIR)/man/man1/tt2text.1
$(INSTALL) -D --mode=644 man1/utm2ll.1 $(INSTALLDIR)/man/man1/utm2ll.1
#
@echo " "
@echo "If this is your first install, not an upgrade, type this to put a copy"
@echo "of the sample configuration file (direwolf.conf) in your home directory:"
@echo " "
@echo " make install-conf"
@echo " "
# TODO: Should we put the sample direwolf.conf file somewhere like
# /usr/share/doc/direwolf/examples and add that to the
# end of the search path list?
# That would make it easy to see user customizations compared to the
# latest sample.
# These would be done as ordinary user.
# The Raspberry Pi has ~/Desktop but Ubuntu does not.
# TODO: Handle Linux variations correctly.
.PHONY: install-conf
install-conf : direwolf.conf
cp direwolf.conf ~
cp telemetry-toolkit/telem-m0xer-3.txt ~
cp telemetry-toolkit/telem-*.conf ~
# Separate application to decode raw data.
decode_aprs : decode_aprs.c dwgpsnmea.o dwgps.o serial_port.o symbols.o ax25_pad.o textcolor.o fcs_calc.o latlong.o log.o telemetry.o tt_text.o
$(CC) $(CFLAGS) -DDECAMAIN -o $@ $^ -lm
# Convert between text and touch tone representation.
text2tt : tt_text.c
$(CC) $(CFLAGS) -DENC_MAIN -o $@ $^
tt2text : tt_text.c
$(CC) $(CFLAGS) -DDEC_MAIN -o $@ $^
# Convert between Latitude/Longitude and UTM coordinates.
ll2utm : ll2utm.c geotranz.a
$(CC) $(CFLAGS) -o $@ $^ -lm
utm2ll : utm2ll.c geotranz.a
$(CC) $(CFLAGS) -o $@ $^ -lm
# Convert from log file to GPX.
log2gpx : log2gpx.c
$(CC) $(CFLAGS) -o $@ $^ -lm
# Test application to generate sound.
gen_packets : gen_packets.c ax25_pad.c hdlc_send.c fcs_calc.c gen_tone.c morse.c textcolor.c dsp.c
$(CC) $(CFLAGS) -o $@ $^ $(LDLIBS) -lm
demod.o : tune.h
demod_afsk.o : tune.h
demod_9600.o : tune.h
testagc : atest.c demod.c dsp.c demod_afsk.c demod_9600.c hdlc_rec.c hdlc_rec2.o multi_modem.o rrbb.o \
fcs_calc.c ax25_pad.c decode_aprs.c telemetry.c latlong.c symbols.c tune.h textcolor.c
$(CC) $(CFLAGS) -o atest $^ -lm
./atest 02_Track_2.wav | grep "packets decoded in" > atest.out
# Unit test for AFSK demodulator
atest : atest.c fsk_fast_filter.h demod.c dsp.c demod_afsk.c demod_9600.c hdlc_rec.c hdlc_rec2.o multi_modem.o rrbb.o \
fcs_calc.c ax25_pad.c decode_aprs.c dwgpsnmea.o dwgps.o serial_port.o telemetry.c latlong.c symbols.c textcolor.c tt_text.c
$(CC) $(CFLAGS) -o $@ $^ -lm
# Unit test for inner digipeater algorithm
dtest : digipeater.c pfilter.o ax25_pad.o dedupe.o fcs_calc.o tq.o textcolor.o \
decode_aprs.o dwgpsnmea.o dwgps.o serial_port.o latlong.o telemetry.o symbols.o tt_text.o
$(CC) $(CFLAGS) -DTEST -o $@ $^
./dtest
# Unit test for APRStt.
ttest : aprs_tt.c tt_text.c latlong.c geotranz.a
$(CC) $(CFLAGS) -DTT_MAIN -o $@ $^
# Unit test for IGate
itest : igate.c textcolor.c ax25_pad.c fcs_calc.c
$(CC) $(CFLAGS) -DITEST -o $@ $^
./itest
# Unit test for UDP reception with AFSK demodulator
udptest : udp_test.c demod.c dsp.c demod_afsk.c demod_9600.c hdlc_rec.c hdlc_rec2.c multi_modem.c rrbb.c fcs_calc.c ax25_pad.c decode_aprs.c symbols.c textcolor.c
$(CC) $(CFLAGS) -o $@ $^ -lm
./udptest
# Unit test for telemetry decoding.
tlmtest : telemetry.c ax25_pad.c fcs_calc.c textcolor.c
$(CC) $(CFLAGS) -o $@ $^ -lm
./tlmtest
# Multiple AGWPE network or serial port clients to test TNCs side by side.
aclients : aclients.c ax25_pad.c fcs_calc.c textcolor.c
$(CC) $(CFLAGS) -g -o $@ $^
# Touch Tone to Speech sample application.
ttcalc : ttcalc.o ax25_pad.o fcs_calc.o textcolor.o
$(CC) $(CFLAGS) -g -o $@ $^
depend : $(wildcard *.c)
makedepend -f $(lastword $(MAKEFILE_LIST)) -- $(CFLAGS) -- $^
.PHONY: clean
clean :
rm -f direwolf decode_aprs text2tt tt2text ll2utm utm2ll aclients atest log2gpx gen_packets ttcalc \
fsk_fast_filter.h *.o *.a
echo " " > tune.h
.PHONY: dist-mac
dist-mac: direwolf decode_aprs text2tt tt2text ll2utm utm2ll aclients log2gpx gen_packets \
tocalls.txt symbols-new.txt symbolsX.txt dw-icon.png
rm -f ../direwolf_dist_bin.zip
(cd .. ; zip direwolf_dist_bin.zip \
$(INSTALLDIR)/bin/direwolf \
$(INSTALLDIR)/bin/decode_aprs \
$(INSTALLDIR)/bin/text2tt \
$(INSTALLDIR)/bin/tt2text \
$(INSTALLDIR)/bin/ll2utm \
$(INSTALLDIR)/bin/utm2ll \
$(INSTALLDIR)/bin/aclients \
$(INSTALLDIR)/bin/log2gpx \
$(INSTALLDIR)/bin/gen_packets \
$(INSTALLDIR)/bin/atest \
$(INSTALLDIR)/bin/ttcalc \
$(INSTALLDIR)/bin/dwespeak.sh \
$(INSTALLDIR)/share/direwolf/tocalls.txt \
$(INSTALLDIR)/share/direwolf/config/direwolf.conf \
$(INSTALLDIR)/share/direwolf/symbols-new.txt \
$(INSTALLDIR)/share/direwolf/symbolsX.txt \
$(INSTALLDIR)/share/direwolf/dw-icon.png \
$(INSTALLDIR)/share/doc/direwolf/README.md \
$(INSTALLDIR)/share/doc/direwolf/CHANGES.md \
$(INSTALLDIR)/share/doc/direwolf/LICENSE-dire-wolf.txt \
$(INSTALLDIR)/share/doc/direwolf/LICENSE-other.txt \
$(INSTALLDIR)/share/doc/direwolf/User-Guide.pdf \
$(INSTALLDIR)/share/doc/direwolf/Raspberry-Pi-APRS.pdf \
$(INSTALLDIR)/share/doc/direwolf/Raspberry-Pi-APRS-Tracker.pdf \
$(INSTALLDIR)/share/doc/direwolf/APRStt-Implementation-Notes.pdf \
$(INSTALLDIR)/share/doc/direwolf/APRS-Telemetry-Toolkit.pdf \
$(INSTALLDIR)/man/man1/aclients.1 \
$(INSTALLDIR)/man/man1/atest.1 \
$(INSTALLDIR)/man/man1/decode_aprs.1 \
$(INSTALLDIR)/man/man1/direwolf.1 \
$(INSTALLDIR)/man/man1/gen_packets.1 \
$(INSTALLDIR)/man/man1/ll2utm.1 \
$(INSTALLDIR)/man/man1/log2gpx.1 \
$(INSTALLDIR)/man/man1/text2tt.1 \
$(INSTALLDIR)/man/man1/tt2text.1 \
$(INSTALLDIR)/man/man1/utm2ll.1 \
)
# Package it up for distribution.
.PHONY: dist-src
dist-src : README.md CHANGES.md \
doc/User-Guide.pdf doc/Raspberry-Pi-APRS.pdf \
doc/Raspberry-Pi-APRS-Tracker.pdf doc/APRStt-Implementation-Notes.pdf \
dw-start.sh dwespeak.bat dwespeak.sh \
tocalls.txt symbols-new.txt symbolsX.txt direwolf.spec
rm -f fsk_fast_filter.h
echo " " > tune.h
rm -f ../$z-src.zip
(cd .. ; zip $z-src.zip \
$z/README.md \
$z/CHANGES.md \
$z/LICENSE* \
$z/doc/User-Guide.pdf \
$z/doc/Raspberry-Pi-APRS.pdf \
$z/doc/Raspberry-Pi-APRS-Tracker.pdf \
$z/doc/APRStt-Implementation-Notes.pdf \
$z/Makefile* \
$z/*.c $z/*.h \
$z/regex/* $z/misc/* $z/geotranz/* \
$z/man1/* \
$z/generic.conf \
$z/tocalls.txt $z/symbols-new.txt $z/symbolsX.txt \
$z/dw-icon.png $z/dw-icon.rc $z/dw-icon.ico \
$z/dw-start.sh $z/direwolf.spec \
$z/dwespeak.bat $z/dwespeak.sh \
$z/telemetry-toolkit/* )
#
# The destination field is often used to identify the manufacturer/model.
# These are not hardcoded into Dire Wolf. Instead they are read from
# a file called tocalls.txt at application start up time.
#
# The original permanent symbols are built in but the "new" symbols,
# using overlays, are often updated. These are also read from files.
#
# You can obtain an updated copy by typing "make tocalls-symbols".
# This is not part of the normal build process. You have to do this explicitly.
#
# The locations below appear to be the most recent.
# The copy at http://www.aprs.org/tocalls.txt is out of date.
#
.PHONY: tocalls-symbols
tocalls-symbols :
cp tocalls.txt tocalls.txt~
wget http://www.aprs.org/aprs11/tocalls.txt -O tocalls.txt
-diff tocalls.txt~ tocalls.txt
cp symbols-new.txt symbols-new.txt~
wget http://www.aprs.org/symbols/symbols-new.txt -O symbols-new.txt
-diff symbols-new.txt~ symbols-new.txt
cp symbolsX.txt symbolsX.txt~
wget http://www.aprs.org/symbols/symbolsX.txt -O symbolsX.txt
-diff symbolsX.txt~ symbolsX.txt
Reference in New Issue View Git Blame Copy Permalink