---------------- Revision history ---------------- ----------- Version 1.1 -- December 2014 ----------- * Changes since beta test version. It is still highly recommended, but no longer mandatory, that beaconing be enabled for digipeating to work. * Known problems. Sometimes kissattach fails to connect with "direwolf -p". The User Guide and Raspberry Pi APRS document have a couple work-arounds. ----------- Version 1.1 -- Beta Test 1 -- November 2014 ----------- * New Features: Logging of received packets and utility to convert log file into GPX format. AGW network port formerly allowed only one connection at a time. It can now accept 3 client applications at the same time. (Same has not yet been done for network KISS port.) Frequency / offset / tone standard formats are now recognized. Non-standard attempts, in the comment, are often detected and a message suggests the correct format. Telemetry is now recognized. Messages are printed for usage that does not adhere to the published standard. Tracker function transmits location from GPS position. New configuration file options: TBEACON and SMARTBEACONING. (For Linux only. Warning - has not been well tested.) Experimental packet regeneration feature for HF use. Will be documented later if proves to be useful... Several enhancements for trying to fix incorrect CRC. - Additional types of attempts to fix a bad CRC. - Optimized code to reduce execution time. - Improved detection of duplicate packets from different fixup attempts. - Set limit on number of packets in fix up later queue. Beacon positions can be specified in either latitude / longitude or UTM coordinates. * Bugs fixed: For Windows version, maximum serial port was COM9. It is now possible to use COM10 and higher. Fixed issue with KISS protocol decoder state that showed up only with "binary" data in packets (e.g. RMS Express). An extra 00 byte was being appended to packets from AGW network protocol 'K' messages. Invalid data from an AGW client application could cause an application crash. OSS (audio interface for non-Linux versions of Unix) should be better now. ----------- Version 1.0a May 2014 ----------- * Bug fix: Beacons sent directly to IGate server had incorrect source address. ----------- Version 1.0 May 2014 ----------- * New Features: Received audio can be obtained with a UDP socket or stdin. This can be used to take audio from software defined radios such as rtl_fm or gqrx. 9600 baud data rate. New PBEACON and OBEACON configuration options. Previously it was necessary to handcraft beacons. Less CPU power required for 300 baud. This is important if you want to run a bunch of decoders at the same time to tolerate off-frequency HF SSB signals. Improved support for UTF-8 character set. Improved troubleshooting display for APRStt macros. In earlier versions, the DTMF decoder was always active because it took a negligible amount of CPU time. Unfortunately this sometimes resulted in too many false positives from some other types of digital transmissions heard on HF. Starting in version 1.0, the DTMF decoder is enabled only when the APRStt gateway is configured. ----------- Version 0.9 November 2013 ----------- * New Features: Selection of non-default audio device for Linux ALSA. Simplified audio device set up for Raspberry Pi. GPIO lines can be used for PTT on suitable Linux systems. Improved 1200 baud decoder. Multiple decoders per channel to tolerate HF SSB signals off frequency. Command line option "-t 0" to disable text colors. APRStt macros which allow short numeric only touch tone sequences to be processed as much longer predefined sequences. * Bugs Fixed: Now works on 64 bit target. * New Restriction for Windows version: Minimum processor is now Pentium 3 or equivalent or later. It's possible to run on something older but you will need to rebuild it from source. ----------- Version 0.8 August 2013 ----------- * New Features: Internet Gateway (IGate) including IPv6 support. Compatibility with YAAC. Preemptive digipeating option. KISS TNC should now work with connected AX.25 protocols (e.g. AX25 for Linux), not just APRS. ----------- Version 0.7 March 2013 ----------- * New Features: Added APRStt gateway capability. For details, see: APRStt-Implementation-Notes.pdf ----------- Version 0.6 February 2013 ----------- * New Features: Improved performance of AFSK demodulator. Now decodes 965 frames from Track 2 of WA8LMF’s TNC Test CD. KISS protocol now available thru a TCP socket. Default port is 8001. Change it with KISSPORT option in configuration file. Ability to salvage frames with bad FCS. See section mentioning "bad apple" in the user guide. Default of fixing 1 bit works well. Fixing more bits not recommended because there is a high probability of occasional corrupted data getting thru. Added AGW "monitor" format messages. Now compatible with APRS-TW for telemetry. * Bugs Fixed: None. * Known Problem: The Linux (but not Cygwin) version eventually hangs if nothing is reading from the KISS pseudo terminal. Some operating system queue fills up, the application write blocks, and decoding stops. * Workaround: If another application is not using the serial KISS interface, run this in another window: tail -f /tmp/kisstnc ----------- Version 0.5 March 2012 ----------- More error checking and messages for invalid APRS data. ----------- Version 0.4 September 2011 ----------- First general availability.