diff --git a/dw-start-cli.sh b/dw-start-cli.sh
new file mode 100644
index 0000000..2b76e51
--- /dev/null
+++ b/dw-start-cli.sh
@@ -0,0 +1,100 @@
+#!/bin/bash
+
+# Simplified, CLI-only direwolf start-up script
+
+# Run this from crontab periodically to check whether direwolf is running
+# and force it to start up automatically.
+
+# Versioning (this file, not direwolf version)
+#-----------
+# v1.4 - KE5WSG - removed support for the GUI and vastly simplified the script
+# v1.3 - KI6ZHD - added variable support for direwolf binary location
+# v1.2 - KI6ZHD - support different versions of VNC
+# v1.1 - KI6ZHD - expanded version to support running on text-only displays with 
+#        auto support; log placement change
+# v1.0 - WB2OSZ - original version for Xwindow displays only
+
+# Enable (true) / disable (false) logging everything to the log file.
+DEBUG=false
+
+#Where will be stored. The directory must be writable by non-root users.
+LOGFILE=/var/tmp/dw-start.log
+
+# Location of the direwolf binary.  Depends on $PATH as shown.
+# Change this if you want to use some other specific location.
+# e.g.  DWPATH="/usr/local/bin/direwolf"
+
+DWPATH="/home/pi/direwolf"
+
+# Location of the direwolf configuration file (direwolf.conf).
+# Change this if you want to customize or protect where your configuration
+# file is stored.
+# e.g. DWCONFIG="/home/pi/direwolf"
+
+DWCONFIG="/home/pi/direwolf"
+
+# Direwolf start up command. Examples for both a simple and SDR config are provided.
+#
+# 1. For normal operation as TNC, digipeater, IGate, etc.
+#    Print audio statistics each 100 seconds for troubleshooting.
+#    Change this command to however you wish to start Direwolf.
+#	 Be sure to use variables as necessary when building your command.
+
+DWCMD="$DWPATH/direwolf -a 100 -c $DWCONFIG/direwolf.conf"
+
+#---------------------------------------------------------------
+#
+# 2. Alternative for running with SDR receiver.
+#    Piping one application into another makes it a little more complicated.
+#    We need to use bash for the | to be recognized.
+
+#DWCMD="bash -c 'rtl_fm -f 144.39M - | $DWPATH/direwolf -c $DWCONFIG/sdr.conf -r 24000 -D 1 -'"
+
+# When running from cron, we have a very minimal environment
+# including PATH=/usr/bin:/bin.
+export PATH=/usr/local/bin:$PATH
+
+# Error checking before attempting to start direwolf
+
+# Check to see whether screen is installed
+if ! type "screen" > /dev/null; then
+	echo -e "ERROR: screen is not installed. Please install using 'sudo apt-get install screen'  Aborting."
+	echo "-----------------------" >> $LOGFILE
+	date >> $LOGFILE
+	echo "ERROR: screen is not installed." >> $LOGFILE
+	exit 1
+fi
+
+# Check to see if there's already a screen session named "direwolf"
+if screen -list | grep -q "direwolf"; then
+	echo "A screen session named 'direwolf' is already running.  Direwolf is likely already running.  Exiting."
+	if $DEBUG; then
+		echo "-----------------------" >> $LOGFILE
+		date >> $LOGFILE
+		echo "A screen session named 'direwolf' was found. Exiting." >> $LOGFILE
+	fi
+	exit
+fi
+
+# It looks like we have everything we need to start direwolf, let's try!
+
+# Wait a little while in case we just rebooted and you're using an old RPi.
+# Feel free to adjust this delay as needed.
+sleep 1
+
+# Print status messages
+echo "Direwolf starting up..."
+echo "-----------------------" >> $LOGFILE
+date >> $LOGFILE
+echo "Direwolf starting up..." >> $LOGFILE
+
+# Start direwolf in a screen session named 'direwolf'
+screen -S direwolf -d -m $DWCMD
+
+# Print direwolf screen information to the screen/log
+screen -list direwolf
+screen -list direwolf >> $LOGFILE
+
+echo "-----------------------"
+echo "-----------------------" >> $LOGFILE
+